The Implementation of Fault Tree Analysis (FTA) dan Failure Mode And Effect Analysis (FMEA) to Improve the Quality of Salt Industry in East Java

Muhammad Mansur Yafi; Muhammad Denny Nur  Cahyono

doi:10.55732/unu.gnk.2024.06.1.10

Authors

Muhammad Mansur Yafi universitas nahdlatul ulama sidoarjo
Muhammad Denny Nur Cahyono Prodi Teknik Industri, Fakultas Teknik, Universitas Nahdlatul Ulama, Sidoarjo 61218, Indonesia

DOI:

https://doi.org/10.55732/unu.gnk.2024.06.1.10

Keywords:

Quality, Quality Management, FTA, FMEA

Abstract

The problem in the salt processing industry is that product defect reach 15% of the total production so it is important to analyze the cause of the defects. The average product defect currently exceeds the company's target of 5%. The Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) methods are used to analyze the production process at PT. XYZ. FTA is used to analyze the causes of each category of product defects, while FMEA is used to classify and analyze each cause of defects.

References

Ardiansyah, N., & Wahyuni, H. C. (2018). Analisis Kualitas Produk Dengan Menggunakan Metode FMEA dan Fault Tree Analisys (FTA) Di Exotic UKM Intako. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 2(2), 58–63. https://doi.org/10.21070/prozima.v2i2.2200

Ben‐daya, M., Kumar, U., & Murthy, D. N. P. (2016). Introduction to Maintenance Engineering. John Wiley & Sons, Ltd.

Dachyar, M., Farizal, & Yafi, M. M. (2018). Analysis of Outpatient Service Queue of Public Hospital in Jakarta. MATEC Web of Conferences, 248, 5–9.

Heizer, J., Render, B., & Munson, C. (2017). Principles of Operations Management Sustainability and Supply Chain Management. Pearson Education Limited.

Hidayat, A. A., Kholil, M., Hendri, & Suhaeri. (2018). The Implementation of FTA (Fault Tree Analysis) and FMEA (Failure Mode and Effect Analysis) Methods to Improve the Quality of Jumbo Roll Products. IOP Conference Series: Materials Science and Engineering, 453(1). https://doi.org/10.1088/1757-899X/453/1/012019

Joy, R. A., Hawlader, M. S., Rahman, M. S., Hossain, M. R., Shamim, S. I., & Mahmud, H. (2024). Improving Quality, Productivity, and Cost Aspects of a Sewing Line of Apparel Industry Using TQM Approach. Mathematical Problems in Engineering, 2024. https://doi.org/10.1155/2024/6697213

Krisnaningsih, E., Gautama, P., Fatih, M., & Syams, K. (2021). Usulan Perbaikan Kualitas dengan Menggunakan Metode FTA dan FMEA. In Jurnal InTent (Vol. 4, Issue 1).

Le, H., & Duffy, G. (2024). Human-Centered Lean Six Sigma Creating a Culture of Integrated Operational Excellence. Routledge Taylor & Francis Group.

Niemann, J., Reich, B., & Stöhr, C. (2024). Lean six sigma: methods for production optimization.

Pakdil, F. (2020). Six Sigma for Students A Problem-Solving Methodology. In Six Sigma for Students. Springer. https://doi.org/10.1007/978-3-030-40709-4

Pearlson, K. E., & Saunders, C. S. (2010). Managing and Using Information Systems A Strategic Approach. JOHN WILEY & SONS, INC. https://doi.org/10.1088/1751-8113/44/8/085201

Pyzdek, T., & Keller, P. A. (2010). The Six Sigma Handbook.

Schroeder, R., & Goldstein, S. M. (2018). Operations Management in the Supply Chain Decisions and Cases. McGraw-Hill Education. https://doi.org/10.4324/9780203848982-8

Tarantino, A. (2022). Smart Manufacturing The Lean Six Sigma Way. In Wiley Online Library. John Wiley & Sons, Inc.

Tokgöz, E. (2024). Quality and Lean Six Sigma for Engineering Technicians. Springer.

Wessiani, N. A., & Yoshio, F. (2018). Failure mode effect analysis and fault tree analysis as a combined methodology in risk management. IOP Conference Series: Materials Science and Engineering, 337(1), 1–12. https://doi.org/10.1088/1757-899X/337/1/012033

Yafi, M. M. (2019). Analisis Proses Pada Pelayanan Rumah Sakit Di Jawa Timur. Greenomika, 1(2), 117–120.

Zaki, A., Rachma Kamila, E., Eka Violita, C., Informasi, S., Barang, P., & Kamila, R. (2023). Analisis Perancangan Sistem Informasi Persediaan Barang (Studi Kasus di CV. Mysneaker Retail Indo). Greenomika, 05(1), 94–102.